PS4 White Light of Death – Easy Solutions

Read time 7 minutes

We are sure by now you’ve all heard of the dreaded PS4 White Light of Death (WLOD) issue. It’s been happening to a lot of people lately, and it can be really frustrating when your console just stops working. Well, we are here to assure you that there is hope! We’ve fixed our PS4 with one of these methods, and we are positive that at least one of them will work for you too. So read on, and hopefully, your console will be up & running again in no time.

PS4 White Light of Death – Causes

There are many causes for the PS4 White Light of Death issue, but the most common one is hardware failure. Other causes include:

• Overheating: The PS4 console can overheat if it is placed in an enclosed area or if it is used for prolonged periods of time without proper ventilation.
• HDMI Issues: The HDMI port connects the PS4 to the TV, and if it’s not making a proper connection, the PS4 won’t work.
• Firmware Issues: If the PS4 firmware is not up to date, it can cause the console to malfunction.
• Blown IC Chip: This can happen if you use an improper HDMI cable or if you plug/unplug the HDMI cable too often.
• Power Supply Problems: If the PS4 power supply is not working effectively, it can cause the console to shut down unexpectedly or show a white light on the top of the unit.
• Outdated Drivers: If your system’s drivers are out-of-date, it can cause all sorts of problems, including video issues like this one.

One of the most general causes of the PS4 WLOD is hardware damage. If your PS4 was dropped or otherwise subject to physical trauma, it’s possible that one of the internal components has become dislodged or damaged.

To check for hardware damage, first, make sure that your PS4 is properly plugged into an outlet and that all cables are securely connected. Then, power on your PS4 and listen for any unusual sounds coming from the console. If you hear a grinding noise or see sparks coming from inside the PS4, unplug it immediately and contact Sony for assistance.

If your PS4 appears to be rightly plugged in and there’s no obvious hardware damage, the next thing is to try a power cycle. This simply means turning off your PS4 completely and then unplugging it from the power outlet for at least 30 seconds.

After 30 seconds have passed, plug your PS4 back in and turn it on. In most cases, this will fix the WLOD issue and allow you to continue playing your games.

This issue can be caused by many factors, but most often, it is due to outdated controller drivers. Here, we will see how to update the controller drivers to fix this issue.

1. Open the Device Manager on your PC. You can do this by searching for the “Device Manager” in the Start menu.
2. Expand the section “Universal Serial Bus controllers.”
3. Locate the “USB Root Hub” and right-click on them one by one. Select “Update Driver“.
4. Choose the option “Browse my computer for driver software.”
5. Then tap the “Let me pick” link.
6. Click on the “Have Disk” button.
7. Browse and select the folder where you extracted the driver files. Click “OK.” then Next and Install.

By following the steps above, you should be able to update the controller drivers and fix the PS4 white light of death issue.

PS4’s Safe Mode menu is a great way to solve issues you may be having with your console. The Safe Mode menu allows you to start the console with only the most basic functions activated. This can help if your PS4 is not starting up properly. It can also help if your console is stuck in an infinite loop or you are experiencing other issues.

To enter Safe Mode on the PS4, follow these steps:

1. Turn off your PS4 with the power button on the front of the console.
2. Once the PS4 is off, press & hold the power button again.
3. Keep holding the power button until you get 2 beeps. This means that your PS4 is now in Safe Mode.
4. Once your PS4 is in Safe Mode, connect a DualShock 4 controller to the PS4 using a USB data cable.
5. Press the PS button on the controller to log into Safe Mode.
6. You will now see a list of options on the screen. Choose the option that you want and press X on the controller to select it.
7. If you want to exit Safe Mode, simply turn off your PS4 and then turn it back on again without holding the power button down this time.

In case you are still stuck with the white light of death error, the controller reset becomes the viable option for you. Go through the steps below.

1. Turn off your PS4 console and unplug it from the power outlet.
2. Locate the small hole on the back of the PS4 controller near the L2 shoulder button.
3. Using a paperclip or other sharp object, press and hold the button inside the hole for about 3-5 seconds.
4. While still holding the button, plug your controller into the PS4 console using a USB cable. Continue to push the button for an additional 5 seconds.
5. After a few seconds, you may also see a blinking LED on your controller, indicating that it’s been reset. You can now release the button and test your controller to see if the issue has been fixed.

If neither of the above solutions works, it’s possible that you’re dealing with a software issue. The first thing to try is updating your PS4’s firmware to the latest version. You can perform this by going to Settings > System Software Update and following the prompts on-screen. Once your firmware has been updated, restart your PS4 and see if the WLOD issue has been resolved.

At times, the troubleshooting process of your PS4 can be risky with the risk of losing your important data but do we have an alternate option to escape this problem? Yes, we have an ultimate solution for all such tech needs.

The PS4 data recovery is possible with the help of the Kernel for Windows Data Recovery tool. This tool can recover lost, deleted, or corrupted data from a PS4 hard drive or any other storage device connected to a Windows system. The tool supports all versions of Windows operating systems, such as Windows 365, 11, 10, 8.1, 8, 7, Vista, XP, 2000, 98, NT, and 95.

The tool has a simple and easy-to-use interface. The software also comes with a free trial version. To recover lost or deleted data from PS4, you just need to follow below- the mentioned steps:

1. Connect the PS4 hard drive to your PC using a USB cable.
2. Launch the tool and select the desired option from the given Quick Scan, Deep Scan, and File Trace from the main screen.
3. Next, you need to select the connected hard drive from the list of drives displayed on your screen and click on Scan.
4. Once the scanning process is completed, a list of recovered files is displayed on your screen.
5. You can preview the recovered files and then save them at the desired location on your computer.

This tool is an effective and reliable tool that can be used for recovering lost or deleted data from PS4. This tool offers various features like a preview option, selective recovery, etc., making it a better choice than other tools available in the market.

Last Say

So, there you have it. These are our top ways to try and fix the PS4 White Light of Death issue. We hope one of these methods works for you and your console! If not, don’t worry – we’ve still got an ultimate troubleshooter for the recovery of your important data. Be sure to try it out before giving up on your PS4 altogether.